Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 191 / 594

6-4 Section Data Input
175
Touch switch (copy setting): [Objects] → [Touch Switch] →
Copy setting
Extended I/O input table (control code input):
[Tools] → [Table] → Control code function
Terminology
Cursor (focus) moving touch switch
Foreground
Background
Focus (cursor) frame
Sign digit
Integer
Decimal
Input digits of maximum limit
Property setting
General
Position: Indicates the display position of the numeral setting input field.
(The attribute point is at the upper left corner of the input field.)
Font type: Specify the font for the numerals to be input.
Standard, Half Height, Double Width
(Only Standard can be set for NT11S/NT11.)
Size: Specify the size of numerals to be displayed.
1 1 (Equal), 1 2 (High), 2 1 (Wide), 2 2, 3 3, 4 4,
8 8 (Not supported for NT20, NT20S) (Only 1 1 (Equal) and
2 1 (Wide) can be set for NT11S/NT11.)
Smoothing: Specify whether or not smoothing processing is executed for
numerals.
(Setting is not possible for NT11S/NT11, NT20, NT20S and
NT600S.)
Attribute: Specify the display attributes (attributes to be displayed depend
on PT models.)
Standard, Inverse, Flash, Inverse Flash
Color
Foreground: Specify the numeral color.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Background: Specify the color of the background in the numeral display
area.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Settings
Table Entry: Specify the table entry number of the numeral memory table
where input data is stored.