Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 172 / 594

6-2 Section Fixed Display
156
(1) The mark data, fixed at 16 16 dot size, is displayed.
Operation procedure
Selection using the menu bar: [Objects] → [Fixed Display] → [Mark]
Selection using the drawing toolbar:
Terminology
Foreground color
Background color
Property setting
General
Position: Indicates the display position of mark data.
(The attribute point is at the upper left corner in the mark data.)
Code: Indicates the character code of the mark data to be displayed.
Attribute: Specify the display attribute.
Standard, Inverse, Flash, Inverse Flash
(With the NT21, NT31, NT31C, NT631 and NT631C, the Inverse
attribute is not supported.)
Scale: Specify the character size.
1 1 (Equal), 1 2 (High), 2 1 (Wide), 2 2, 3 3, 4 4, 8 8
Smoothing: Specify whether smoothing processing is executed for mark
data.
*1
(Setting is not possible for the NT21, NT31, NT31C, NT631 and
NT631C)
Color
Foreground: Set display color of mark data.
Background: Set the color of background in the mark data display area.
: Displays the list for selecting the mark data.
*1: For the NT21, NT31, NT31C, NT631, and NT631C, even under condition
that the string has smoothing ON and the mark has inserted, it will not
work.
Guidance
By specifying mark data, special characters and symbols can be created on
the screen.
To display a mark, specify its code.
If no mark data has been created for the specified code, a blank is displayed.
To change the mark data to be displayed, click on in the property set-
ting dialog box and select the desired mark data in the list.