Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 50 / 594

2-2 Section Installing the Support Tool
34
The program selection screen is displayed to allow you to select the
programs to be installed.
9. Click on the check box, displayed to the left of the program to be selected to
enter a check mark.
The following data and software will be installed depending on the options
that are selected.
Option Data/software that is installed
NT-series Support Tool ver 4.8 The Support Tool, keyboard/tenkey
library, and color pallette symbols
(approx. 23 MB)
System Installer Only the System Installer (access the
system programs directly from the
CD-ROM (approx. 20 MB)
Sample Collection Lamp/touch switch parts library, parts
library list, sample screen data, and ISO
parts library (approx. 30 MB)
Click the Next Button
The screen for specifying the destination for registering the start menu is
displayed.
10. In the start menu of Windows, specify the folder where the short-cut to the
Support Tool is created.
In the initial state, the following folder is selected.
Start\Program\Omron\NTST4.8E