Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 132 / 594

6-1 Section Common Operation
116
(However, it is effective between different shapes of fixed display since they are
treated as one kind.)
(1) Select an element.
Selection of multiple elements collectively is possible.
(2) Select [Draw] (menu bar), then select [Bring to Front] or [Send to Back].
This operation is also possible using the pop-up edit menu; display the pop-
up edit menu by right clicking the mouse on the object and select [Bring to
Front] or [Send to Back] in the menu.
Choose [Bring to Front] to move the selected element to the foreground and
[Send to Back] to move it to the background.
Undoing the operation
The Undo function will undo or cancel the last (most recent) action that was per-
formed. Ten times of Undo can be performed.
It is invoked by:
Menu bar: [Edit] → [Undo]
Draw bar: Click on
Redoing the operation
The Redo function will repeat the last (most recent) action that was performed.
Ten times of Redo can be performed.
It is invoked by:
Menu bar: [Edit] → [Redo]
Draw bar: Click on
6-1-6 Aligning Elements
Two or more elements can be aligned collectively.
There are following six functions for alignment. The buttons below are provided
on the alignment bar.
Align Top: (Short cut key: Ctrl + Up Arrow)
Align Bottom: (Short cut key: Ctrl + Down Arrow)
Align Left: (Short cut key: Ctrl + Left Arrow)
Align Right: (Short cut key: Ctrl + Right Arrow)
Center in a Column: (Short cut key: Ctrl + F9)