Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 133 / 143

118
Segment Program 3 (Block Model 158) Section 6-19
16: CONT Button
When touched, 0 is set in the write address for tag ITEM S2 (ITEM 014: Hold
switch). Tag ITEM S2 (ITEM 014) is referenced and the color is displayed
according to the following table.
The button is built as a momentary ON/OFF Button using a Simple Rectangle
(Type 2). The write address is not set, and the read address for tag ITEM S2
(ITEM 014) is set as display address 1. The label displays “CONT” in the
rough font.
The following macro is set as a Touch OFF Timing macro, and when touched,
the fixed value 0 is written to the write address of tag ITEM S2 (ITEM 014).
$B32767=0;
WRITECMEM ([S2],$B32767,1) ;
A Control Flag is used to reference tag ITEM S1 (ITEM 013), Run/stop com-
mand. If the value is 0, no display/input disabled is set.
17: PAUSE Button
When touched, 1 is set in the write address for tag ITEM S2 (ITEM 014), Hold
switch. Tag ITEM S2 (ITEM 014) is referenced and the color is displayed
according to the following table.
The button is built as a momentary ON/OFF Button using a Simple Rectangle
(Type 2). The write address is not set, and the read address for tag ITEM S2
(ITEM 014) is set as display address 1. The label displays “PAUSE” in the
rough font.
The following macro is set as a Touch OFF Timing macro, and when touched,
the fixed value 1 is written to the write address of tag ITEM S2 (ITEM 014).
$B32767=1;
WRITECMEM ([S2],$B32767,1) ;
A Control Flag is used to reference tag ITEM S1 (ITEM 013: Run/stop com-
mand). If the value is 0, no display/input disabled is set.
18: STEP Display
The fixed text “STEP” is displayed as a label.
19: STEP Numerical Display
A Numeral Display and Input object is used to display the value for tag ITEM
Y3 (ITEM 011: Step output). A Control Flag is set to disable input.
Tag ITEM Y3 (ITEM 011) uses values 0 to 100 from the PLC device/communi-
cations, but the PLC or communications values are displayed with 2 integer
digits and 0 digits below the decimal point, without scaling the values on the
display.
S2 (ITEM 014) value Color
0 Red
1 Yellow
S2 (ITEM 014) value Color
0 Yellow
1 Red