Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 65 / 143

50
Two-position ON/OFF (Block Model 001) Section 6-3
This field is created as an ON/OFF Button using a Select Shape of type 2 to
switch to display of PV error indication characters. Control Flag input is dis-
abled.
4: Alarm Status Display
MH and ML are not provided with 2-position ON/OFF. The other settings are
the same as for Basic PID.
The following diagram is a face plate for 2-position ON/OFF built with the Face
Plate Auto-Builder for NS in a 640×480 screen resolution. The whole face is
built using 458×142 dots.
The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
6-3-2 Tuning Screens
The Tuning Screens for 2-position ON/OFF are almost the same as for Basic
PID (Block Model 011), except for the following differences.
1. A setting field for each parameter is not provided.
2. AT is not supported.
3. MV is not included in the realtime trend graph.
4. The face plate is for 2-position ON/OFF.