Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 127 / 143

112
Batch Flowrate Capture (Block Model 014) Section 6-18
6-18-2 Tuning Screens
This section describes only the differences between the tuning screens in the
Batch Flowrate Capture Block and Basic PID Block (Block Model 011). For
details on the areas not covered here, refer to
6-1-2 Tuning Screens .
1: Parameter Settings
These fields are used to display and set each parameter for Batch Flowrate
Capture processing.
Numeral Display and Input objects are used to create these fields, and a ten-
key pad is displayed when a field is touched.
The following table shows the upper and lower limits of the setting ranges.
The following table shows the units that are displayed. These units are fixed.
Parameter Referenced tag ITEM
Overrun setting B0 (032)
(The setting address is a working address.)
Pre-batch setting BP (033)
(The setting address is a working address.)
Flowrate limitation B1 (034)
(The setting address is a working address.)
MV index position MV_IDX (098)
Parameter Lower limit Upper limit
Overrun setting 0 9999
Pre-batch setting 0 9999
Flowrate limitation 0 9999
MV index position
−
15.00 115.0
Parameter Unit
Overrun setting None
Pre-batch setting None
Flowrate limitation None
MV index position %
6
7