Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 119 / 143

104
Blended PID (Block Model 013) Section 6-17
4: Y1 Value Display
A Numeral Display and Input object is used to display the value of tag ITEM
Y1 in engineering units. Control Flag input is disabled.
5: Y2 Value Display
A Numeral Display and Input object is used to display the value of tag ITEM
Y2 in engineering units. Control Flag input is disabled.
6: Y1 Bar Display
Displays tag ITEM Y1 using a Level Meter object. The meter color is green,
the maximum value displayed is 11500 (115%), and the minimum value dis-
played is
−
1500 (
−
15%). The bar is set to display the zero point.
7: Y2 Bar Display
Displays tag ITEM Y2 using a Level Meter object. The meter color is green,
the maximum value displayed is 11500 (115%), and the minimum value dis-
played is
−
1500 (
−
15%). The bar is set to display the zero point.
The following diagram shows a Reversible Motor Manipulator face plate built
using the Face Plate Auto-Builder for NS in a 640
×
480 screen resolution.
The whole face is built using 458
×
142 dots.
The display and operation of each object in the face plate is the same as the
version for 800
×
600 screen resolution.
Alarm type Referenced tag ITEM
DLL (Deviation low/low alarm) DLL (036)
DL (Deviation low alarm) DL (037)
DH (Deviation high alarm) DH (038)
DHH (Deviation high/high alarm) DHH (039)
MH (High MV limit) MHA (078)
ML (Low MV limit) MLA (079)