Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 82 / 143

67
Segment Program 2 (Block Model 157) Section 6-7
6-7-2 Tuning Screens
1: Status Display
This button switches the status between the status of the Stop block operation
command (tag ITEM MT_ST (ITEM 000)) and Disable Reference Input Switch
(tag ITEM S5 (ITEM 020)).
These buttons are built as alternate ON/OFF Buttons using Simple Rectan-
gles (Type 2), according to the information in the following table.
The read address is set in the display address and the write address is set in
write address 1.
2: Alarm Setting/Parameters
Segment Program 2 does not provide alarm settings or parameter settings.
3: Realtime Trend Graph
Tag ITEM X1 (ITEM 007) and tag ITEM Y1 (ITEM 008) are displayed as
graphs.
Each tag ITEM is drawn using the following graph lines.
Button Tag
ITEM
OFF
color
ON
color
OFF label ON label Write
confirmation
message
Stop block
operation
command MT_ST
(ITEM
000)
Gray Yellow Operating Sus-
pended Yes
“OK?”
Disable
reference
input S5
(ITEM
020) Gray Yellow Ref. ON Ref. OFF Yes
“OK?”
Tag ITEM Color Minimum
value
Maximum
value
Line type Marker Step
display
X1 Green
−
1500 11500 Solid line None Not used.
Y1 Yellow
−
1500 11500 Solid line None Not used.
1
2
3
4
5