Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 34 / 143

19
Basic Operation Section 4-1
Message ID Number Offset
Specify the first number allocated for confirmation messages in the NS-series
PT. There are two confirmation messages used by the Face Plate Auto-
Builder for NS. These two messages are automatically created when a project
is generated.
■
Button
Build
Click this button to start automatic screen building.
Quit
Click this button to exit the Face Plate Auto-Builder for NS.
Version
Click this button to display the Version Information Dialog Box for the Face
Plate Auto-Builder for NS.
Step 3: Register Host
Names
When all settings have been completed in step 2, click the Build Button. The
following dialog box will be displayed.
This window is used to make the host settings to create an NS-series project
file from a CX-Process project that uses multiple nodes. With the NS-series
PT, nodes are registered as hosts. Host settings are described next.
1,2,3... 1. Select the host to be set in the Host Registration Dialog Box and click the
Settings Button. The following dialog box will be displayed.