Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 131 / 143

116
Segment Program 3 (Block Model 158) Section 6-19
4: Y1 Display
The fixed text “Y1” is displayed as a label.
5: Y1 Numerical Value Display
A Numerical Display and Input object is used to display the value of tag ITEM
Y1 (ITEM 008). The program output value is displayed in engineering units. A
Control Flag is set to disable input.
6: Y2 Display
The fixed text “Y2” is displayed as a label.
7: Y2 Numerical Value Display
A Numerical Display and Input object is used to display the value of tag ITEM
Y2L (ITEM 009) (elapsed time output (low byte)) as the low byte, and the
value of tag ITEM Y2H (ITEM 010) (elapsed time output (high byte)) as the
high byte, with the values divided by 10. A Control Flag is set to disable input.
8: Unit Display
The unit (engineering units) is displayed (up to 8 single-byte characters).
9: X1 Bar
Tag ITEM X1 (ITEM 007) displays the reference input value using a Level
Meter object. The meter color is green, the maximum value displayed is
11500 (115%), and the minimum value displayed is
−
1500 (
−
15%). The bar is
set to display the zero point.
10: Y1 Bar
Tag ITEM Y1 (ITEM 008) displays the program output value using a Level
Meter object. The meter color is yellow, the maximum value displayed is
11500 (115%), and the minimum value displayed is
−
1500 (
−
15%). The bar is
set to display the zero point.
11: Y1 Bar Gradation Display
The X1 bar and Y1 bar are incremented with 0%, 50%, and 100% slits in a
fixed graphic display.
12: WAIT Button
When touched, 1 is set in the write address for tag ITEM S3 (ITEM 017: Move
to next wait command).
When tag ITEM U10 (ITEM 019: Waiting) is 0, the button is yellow, and when
the value is 1, the button is red. The button is built using a momentary ON/
OFF Button with a Simple Rectangle (Type 2). The write address for tag ITEM
S3 (ITEM 017) is set as the write address, and the read address for tag ITEM
U10 (ITEM 019) is set as display address 1 while waiting. The label displays
“WAIT” in the rough font.