Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 107 / 143

92
Motor Manipulator (Block Model 222) Section 6-14
6-14-1 Face Plates
This block operates and monitors a motor. Overcurrents can be monitored
using an input from a CT and operating errors can be monitored using an
answer input.
1: Status Display
Indicates a CT input high-limit error. The value of tag ITEM H determines the
status character string display.
This button is created as an ON/OFF Button using a Simple Rectangle (Type
1) to switch the label ON/OFF. Control Flag input is disabled.
2: CT Input Display
A Numeral Display and Input object is used to display the value of tag ITEM
X1 (ITEM 032) in engineering units. Control Flag input is disabled.
3: Motor Answer Error Display
A lamp indicates an error when the answer contact input remains OFF for
longer than the specified answer check time while the motor's operation ON
command is ON. The lamp is red when an error occurred.
The bit lamp is set as a rectangular single-line lamp with the following display
colors.
The label displays “Motor answer” in the rough font.
Display H: CT input high-limit alarm output (036)
NR 0
H 1
Display color U2: Motor answer error (022)
Green 0
Red 1
1
2
3
4
5