Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 50 / 143

35
Basic PID (Block Model 011) Section 6-1
6-1 Basic PID (Block Model 011)
6-1-1 Face Plates
The following diagram shows a face plate for Basic PID built using the Face
Plate Auto-Builder for NS in an 800×600 screen resolution.
The whole face is built using 580×133 dots.
1: Tuning Screen Button
Touch this button to switch to the Tuning Screen for the corresponding tag
name. This button is created as a Command Button.
The Tuning Screen Button is not provided in the face plates in the Tuning
Screen.
2: Tag Name
The tag name in the CSV tag file is set as a label and displayed as a Text
object (up to 16 characters).
3: Tag Comment
The tag comment in the CSV tag file is set as a label and displayed as a Text
object (up to 16 characters).
4: Status Display 1
Either AUTO, MAN, or CAS status is displayed. The status character string
displayed is determined by the combination of values for tag ITEMs R/L_SW
and A/M_SW.
These buttons are created as ON/OFF Buttons using a Select Shape of type 3
to switch the graphic displaying AUTO, MAN, and CAS characters.
Control Flag input is disabled.
Display R/L_SE (ITEM 026) A/M_SW (ITEM 086)
MAN 0 0
(No characters displayed) 1 0
AUTO 0 1
CAS 1 1
1
2
3
4 5
6
7
8
9
10
11 12
15
16
17
18
20
19
21
22
23
24
13
14
In the graphic display, 24 is
displayed as follows:
25