Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 32 / 143

17
Basic Operation Section 4-1
Note A maximum of 85 Segment Program 3 blocks can be created. Con-
version will not be possible if there are more than 85 Segment Pro-
gram 3 blocks registered in the CSV tag file.
Enable for Making Detail Setting Screen of Segment Program 2 (Project
Version 4 or Later)
If this option is selected and a Segment Program 2 function block is used,
detail setting screens (time width-output setting screen and wait width setting
screen) to set the Segment Program 2 parameters will be built automatically.
Note The capacity of the NS-series PT may be exceeded if a large quantity of
screens are generated automatically. An error will occur when transferring the
project if the capacity is exceeded. If this occurs, delete the detail setting
screens and wait screens. When deleting detail setting screens and wait
screens, always delete the parts from the screen first and then delete the
screens using the screen maintenance function. (It will not be possible to
delete the screens using the screen maintenance function if there are parts
remaining on the screens.)
Tool - Resource Report can be used from the
CX-Designer to see if the capacity has been exceeded.
Screen Number Offset
Set the first screen number in the NS-series PT.
Starting from the specified screen number offset, screen numbers are
assigned to the Control Screens (up to 25 screens) and Tuning Screens (up to
100 screens) in that order.
Unit Number Offset
Set the first number allocated from the Unit and Scale No. data in the NS-
series PT.
Unit and Scale No. data items for the NS-series PT Numeral Display and Input
objects are created automatically by the Face Plate Auto-Builder for NS from
the scaling upper/lower limit and unit characters.
If version 2 is selected, up to 69 Unit and Scale No. data items will be created
from the first number tag set here. If version 4 or version 6.6 is selected, up to
207 Unit and Scale No. data items will be created (when using Segment Pro-
gram 3, up to 632 Unit and Scale No. data items will be created). (See note.)
Refer to the following illustration for details.
Note The number of data items shown here will be created when the
maximum of 85 Segment Program 3 blocks are registered in addi-
tion to 15 other blocks, making a total of 100 blocks.
Project version Version 2 Version 4 Version 6.6
Range 0 to 3799 0 to 3599 0 to 3599
Default 0
Project version Version 2 Version 4 Version 6.6
Range 12 to 800 12 to 700 12 to 700
Default 12