Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 58 / 143

43
Basic PID (Block Model 011) Section 6-1
1: Status
This button is used to switch between the statuses for Stop Block Operation
Command (tag ITEM MT_ST (ITEM 000)), Alarm Stop Switch (tag ITEM AOF
(ITEM 017)), and AT Command/AT Executing (tag ITEM AT (ITEM 035)).
Each button is built as an alternate ON/OFF Button, and using an Alternate
Simple Rectangle (Type 2), as shown in the following table.
The read address is set as the display address and the write address is set as
write address 1.
2: Alarm Set Values
The alarm set values are displayed and set with engineering units. The follow-
ing table shows the tag ITEMs used for setting alarm set values.
Numeral Display and Input objects are used to create these fields, and a ten-
key pad is displayed when a field is touched. The following table shows the
upper and lower limits of the setting ranges.
The engineering unit displayed for the unit as a Text object.
Data is written to the write address of each tag ITEM using the Before Writing
Numeral/String macro.
Button Tag
ITEM
Color
(OFF) Color
(ON)
Label
(OFF) Label
(ON)
Write
confirmation
message
Stop block
operation
command MT_ST
(ITEM
000)
Gray Yellow Operating Operation
stopped Yes
“OK?”
Alarm
stop
switch AOF
(ITEM
017)
Gray Yellow Alarm ON Alarm dis-
abled Yes
“OK?”
AT com-
mand/ AT
executing AT
(ITEM
035)
Gray Yellow AT OFF AT ON Yes
“The MV will
change is AT is
executed/stopped.
OK?”
Alarm type Alarm set value tag ITEM
LL (Low/low alarm) LL_SP (ITEM 011)
L (Low alarm) L_SP (ITEM 010)
H (High alarm) H_SP (ITEM 009)
HH (High/high alarm) HH_SP (ITEM 008)
DV (Deviation alarm) DVA_SP (ITEM 041)
Alarm type Upper limit Lower limit
LL (Low/low alarm)
−
15% in the corresponding
engineering units
115% in the corresponding
engineering units
L (Low alarm)
−
15% in the corresponding
engineering units
115% in the corresponding
engineering units
H (High alarm)
−
15% in the corresponding
engineering units
115% in the corresponding
engineering units
HH (High/high
alarm)
−
15% in the corresponding
engineering units
115% in the corresponding
engineering units
DV (Deviation alarm) 0% in the corresponding engi-
neering units
115% in the corresponding
engineering units