Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 77 / 143

62
Segment Program 2 (Block Model 157) Section 6-7
3: Parameters
The Indicator does not provide parameter settings.
4: Realtime trend
The Indicator displays a graph for PV only.
The following screen is a Tuning Screen for the Indicator face plate built using
the Face Plate Auto-Builder for NS in a 640×480 screen resolution.
The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
Indicator does not provide a setting field for each parameter, so up to eight
characters can be displayed for the unit character string, instead of the four for
Basic PID.
6-7 Segment Program 2 (Block Model 157)
This section describes only the differences between the Segment Program 2
and Basic PID (Block Model 011). For details on the areas not covered here,
refer to
6-1 Basic PID (Block Model 011) .