Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 108 / 143

93
Reversible Motor Manipulator (Block Model 223) Section 6-15
4: CT Input High Alarm SV Display
Displays the CT input high alarm SV in a bar graph. The alarm SVs are dis-
played along with the CT input bar at the right side of the face plate, with a
maximum value of 115% and a minimum value of
−
15%.
• The alarm settings are displayed in red.
• The maximum value displayed is 11500 (115%) and the minimum value
displayed is
−
1500 (
−
15%).
• The zero point is specified to be displayed.
5: CT Input Bar
A Level Meter object is used to display tag ITEM X1 (ITEM 032). The meter
color is green, maximum value is 11500 (115%), and minimum value is
−
1500
(
−
15%). The bar is set to display the zero point.
The following diagram shows a Motor Manipulator face plate built using the
Face Plate Auto-Builder for NS in a 640
×
480 screen resolution.
The whole face is built using 458
×
142 dots.
The display and operation of each object in the face plate is the same as the
version for 800
×
600 screen resolution.
6-15 Reversible Motor Manipulator (Block Model 223)
This section describes only the differences between the Reversible Motor
Manipulator Block and Motor Manipulator Block (Block Model 222). For details
on the areas not covered here, refer to
6-14 Motor Manipulator (Block Model
222) .
Alarm type Alarm SV Tag ITEM
H (High alarm) H_SP: CT input high alarm SV (033)