Omron Face Plate Auto-Builder for NS 3.1, Operation Manual

Page: 23 / 143

8
Installation Method Section 2-1
2-1 Installation Method
The release notes will be displayed automatically after inserting the installa-
tion CD in the CD-ROM drive. Install the software after reading the release
notes thoroughly.
2-1-1 Installation Precautions
• Before installing the Face Plate Auto-Builder for NS, close all Windows
programs.
• Do not install on a compressed drive. If a file on a compressed drive is
corrupted, it cannot be recovered.
• Do not cancel installation during setup. Doing so may result in some files
already copied remaining in the installation directory.
• Do not turn OFF the power or reset the personal computer during installa-
tion. Doing so may damage data in the computer.
• If Windows 98 is used, be sure to use Second Edition.
• If Windows 2000 is used, be user to use Service Pack 3 or later. To check
the Service Pack version number, from the Start Menu select Settings -
Control Panel - System . The System Properties Window will appear.
Click the General Tab. The Service Pack version is displayed under Sys-
tem . If the Service Pack version is not displayed, it is not installed. Refer
to the Microsoft Website for details on compatibility.
• For Windows NT, 2000, XP and Vista users, log in as the administrator or
user with administrative authority. A filter preventing unauthorized users is
provided and will cause an access error to occur.
• After installation, Windows must be restarted. Use the Installation Wizard
Dialog Box to restart, if required.
2-1-2 Installing the Face Plate Auto-Builder for NS
Step 1: Execute the following setup wizard program from the CD.
<CD-ROM drive> \Face Plate Auto-Builder for NS\DISK1\SETUP.EXE.
Step 2: Start installation of the Face Plate Auto-Builder for NS by clicking the
Next Button.