manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 84 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 84

1

Ensure the revision number of the UPS is correct.
Refer to the Hardware Manual for details.

2

Ensure the UPS is connected to the IPC with a USB cable.

3

Open the Power Attendant Lite Utility installer folder and activate the installer file 

setup.exe

.

4

Follow the installer steps to complete the installation.

The Power Attendant Lite Utility is installed.

Configuration

Configure the Power Attendant Lite Utility before using the IPC with a UPS connected using USB.

To configure the Power Attendant Lite Utility:

1

Activate the icon of the Power Attendant Lite Utility to start the software.

A UPS selection window will be displayed.

2

Select the connected UPS.
A Login window will be displayed.

3

Login with ID 

Admin

 and password 

omron

.

The Top window with UPS status information will be displayed.

4

Configure the parameters for your specific situation.

3 Software

3-22

IPC Application Controller User's Manual (I632)

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments