manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 79 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 79

Error ID

Message

35

Cannot find a source device. Please ensure that there is an SSD or HDD inserted in the IPC

36

Multiple disks detected with the same partition layout. Please ensure there is only one SSD or
HDD inserted in the IPC to restore the backup

37

Multiple source devices detected. To backup the correct disk, please ensure that there is only
one SSD or HDD inserted in the IPC

38

Unable to create a partition in the AI database disk

39

AI database disk creation (partitioning and formatting) failed

40

Unable to identify a suitable disk to format as AI database disk. Please ensure there is one
SSD or HDD that has no Windows OS

41

Multiple disks detected suitable to format as AI database disk. Please ensure there is only one
SSD or HDD that has no Windows OS

42

Unable to identify any Windows disk. Please ensure that a Windows disk is inserted in the IPC

43

Multiple Windows disks detected. Please ensure that there is only one Windows disk inserted
in the IPC

*1.

The partition name will be indicated. Examples are 'Boot partition' or 'Master Boot Record' .

3 Software

3-17

IPC Application Controller User's Manual (I632)

3-3
 Support Software

3

3-3-4

 Rescue Disk Creator

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments