Omron AC1-152000, User Manual, Page: 179 / 230

Tool Goal
Preparation in
advance
Restore details Refer to
Windows
WinRE Restore Win-
dows to the 'Out
of the box' facto-
ry state No actions re-
quired.
A recovery parti-
tion is pre-instal-
led
•
A partial recovery or re-
covery of user data is
not possible
•
Windows recovers to
the 'Out of the box' sit-
uation
•
The IPC can boot from
the partition
Create : Not applicable.
Restore : Recover Win-
dows 10 Using WinRE on
page 7-31
Windows
Backup and Re-
store Restore a user's
selection of fold-
ers Create a Win-
dows Backup
•
The data is restored to
the state of the previ-
ously created backup
•
Recovery of specific
folders is possible.
Backups can be creat-
ed automatically at pre-
defined intervals
•
No recovery of the Win-
dows operating system
•
Uses any type of stor-
age device
Create : Create a Custom
Backup with Windows
Backup
on page 7-11
Check : Check the Cus-
tom Backup Storage De-
vice (Windows)
on page
7-14
Restore : Restore a Cus-
tom Backup with Windows
on page 7-34
Additional Information
Contact your OMRON representative when the IPC needs to be restored and you do not have
any restore or recover possibility.
Create a New Rescue Disk with the Rescue Disk Creator
A Rescue Disk is a disk with the Rescue Disk Utility that enables users to create a system backup and
to do a system restore.
A system backup contains the Windows partition, the boot partition and the MBR.
Prepare:
• The Rescue Disk Creator
Refer to Installation on page 3-12 for installation details.
Refer to Messages Creating the Rescue Disk on page 3-14 for message details.
• A USB storage device that has sufficient capacity to backup the content of the IPC. The capacity
should be at least the Windows partition size + 16 GB. The recommended minimum read/write
speed is 190 MB/s.
Note that all content on this USB storage device will be erased during the Rescue Disk creation.
Use the following procedure to create a new Rescue Disk:
1
Connect a USB storage device that has sufficient capacity to backup the content of the IPC.
2
Select the Windows Start Button.
3
In the search field, input Rescue .
7 Maintenance
7-5
IPC Application Controller User's Manual (I632)
7-1 Preventive Maintenance
7
7-1-4
Create Backup and Repair Data