manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 74 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 74

Compatibility

This software utility can be used on the IPC but also on any other PC with one of the following operat-
ing systems:
• Windows 10
• Windows 7

Installation

The Rescue Disk Creator is preinstalled on the Industrial PC if it comes with a Windows operating sys-
tem installed.

Use the following procedure to reinstall the Rescue Disk Creator:

1

Use Windows Explorer to open the Rescue Disk folder (This PC\Local Disk(C:)\Program Files
(x86)\OMRON\Industrial PC\Rescue Disk).

2

Activate the installer file 

setup.exe

.

A progress bar will visualize the extraction process and then a language selection window
opens.

3

Select your language and then select 

OK

.

The installer window opens.

4

Follow the installer steps to complete the Rescue Disk Creator installation.

The Rescue Disk Creator is installed and available in the OMRON folder in the Windows Start Menu.

3 Software

3-12

IPC Application Controller User's Manual (I632)

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments