Omron AC1-152000, User Manual, Page: 157 / 230

USB
USB
Industrial PC
Input
24 VDC
Power Supply (S8VK)
AC (L)
AC (N)
24 VDC
0 VDC
UPS (S8BA)
Output
Refer to the UPS S8BA User's Manual (Cat. No. U702) for details.
Refer to 5-4-3 Wire the Power Connector on page 5-28 for wiring details.
4
Supply power to the Power Supply.
5
Press and hold the UPS power button until On appears on the UPS display.
6
Power ON the IPC and then wait until the device drivers are successfully installed.
7
Configure the UPS using the UPS Settings Utility.
Refer to
UPS Setting Utility Instruction Manual for S8BA/BU-2RWL for details.
8
Install the Power Attendant Lite Utility.
Refer to
3-3-6 Power Attendant Lite Utility on page 3-21 for Power Attendant Lite Utility details.
9
Configure the UPS using the Power Attendant Lite Utility.
Refer to
3-3-6 Power Attendant Lite Utility on page 3-21 for Power Attendant Lite Utility details.
10
Configure the IPC to auto-start after power loss within the BIOS settings.
Refer to
A-1 BIOS on page A-2 for BIOS details.
11
Simulate a power interruption and confirm a correct shutdown of the IPC.
• Start the IPC
• Start applications
• Create a power interruption
• Monitor the shutdown sequence and confirm a correct shutdown sequence
The UPS is connected and configured.
The IPC will shut down properly in case of a power supply interruption and restart automatically when
the power is restored.
5 Installation
5-45
IPC Application Controller User's Manual (I632)
5-8 Connect UPS
5
5-8-1
Connect UPS Using the USB Connector