Omron AC1-152000, User Manual, Page: 47 / 230

2-4 Connectors
This section gives an overview of the connectors located at the base layer of the IPC Application Con-
troller.
2-4-1 Power Connector
The power connector on the IPC is used to supply 24 VDC power to the IPC.
The power connector is supplied with the IPC.
Additional Information
• Refer to 4-2-1 Power Connector Specifications on page 4-11 for specifications.
• Refer to 5-4-3 Wire the Power Connector on page 5-28 for wiring details.
• Refer to 5-5 Connect on page 5-34 for connection details.
2-4-2
I/O Connector
The I/O connector on the IPC Application Controller provides discrete signals with the following func-
tions.
• Input signal to the IPC when a connected UPS switches to battery power.
• Input signal to the IPC to perform a shutdown or power ON when the signal turns ON.
• Output signal from the IPC to indicate the power status of the IPC.
The I/O connector is supplied with the IPC.
2 Hardware
2-9
IPC Application Controller User's Manual (I632)
2-4 Connectors
2
2-4-1
Power Connector