Omron AC1-152000, User Manual, Page: 78 / 230


Messages Using the Rescue Disk
Using the Rescue Disk the rescue disk utility can display the following error messages:
Error ID Message
10
Backup creation of
*1
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
11
Restore action of
*1
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
12 Cannot allocate the partition for storing backup data. There may be a problem with the target
USB device. Create the Rescue Disk utility on another USB device and try again
13 Cannot create a partition for storing backup data. There may be a problem with the target USB
device. Create the Rescue Disk utility on another USB device and try again
14 The partition for storing backup data cannot be identified. There may be a problem with the
target USB device. Create the Rescue Disk utility on another USB device and try again
15 The partition for storing backup data cannot be prepared for use. There may be a problem
with the target USB device. Create the Rescue Disk utility on another USB device and try
again
16 Unable to identify an Omron Industrial PC. Power cycle the system using the power connector,
then try again
17 Unable to identify an Omron Industrial PC. Power cycle the system using the power connector,
then try again
18
Backup creation of
*1
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
19
Restore action of
*1
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
20 Cannot mount the partition for storing backup data. There may be a problem with the target
USB device. Create the Rescue Disk utility on another USB device and try again
21
Failed creating
*1
partition verification files. Please try again or contact an Omron service repre-
sentative if the problem persists
22
Failed to verify
*1
partition backup files. Please try again or contact an Omron service represen-
tative if the problem persists
23 Cannot create a backup. An Omron NY-series Industrial PC has not been detected. Please
contact an Omron service representative
24 Cannot restore the backup. An Omron NY-series Industrial PC has not been detected. Please
contact an Omron service representative
25 Cannot find a destination device. Please ensure that there is an SSD or HDD inserted in the
IPC
26 Cannot find the Rescue Disk medium. Please ensure the Rescue Disk USB device is connect-
ed to the Industrial PC, then restart the system and try again
27 Cannot mount Windows partition. Please ensure that you have a functional Windows system
before creating a backup
28 Cannot restore. The backup of the Boot partition is corrupted
29 Cannot deploy OSB due to an invalid Boot partition. Please perform a restore operation of the
complete MBR and Boot partition and try again
30 OSB deployment was unsuccessful. Please restart the Rescue Disk utility and try again
31 Multiple Rescue Disk media detected. Ensure there is only a single Rescue Disk USB device
connected to the Industrial PC, then reboot the system and try again
32 Cannot create backup records data due to missing OSB data
33 Cannot create backup records due to missing NX data
34 Cannot create backup records due to a missing Boot partition
3 Software
3-16
IPC Application Controller User's Manual (I632)