Omron AC1-152000, User Manual, Page: 76 / 230


Messages Creating the Rescue Disk
The Rescue Disk Creator can display the following messages:
Message
type
Message Description
Error Creation progress: Failed to format the disk.
Reason:
•
Access denied
•
Call canceled
•
Call cancellation request too late
•
Cluster size is beyond 32 bits
•
Cluster size is too large
•
Cluster size is too small
•
Incompatible media in drive
•
Invalid volume label
•
Input/Output (I/O) error
•
No media in drive
•
Unable to quick format
•
Unknown error
•
Unsupported file system
•
Volume lock failed
•
Volume is not mounted
•
Volume is too large
•
Volume is too small
•
Volume write protected
The mentioned reason prevented formatting
of the connected storage device.
Ensure the connected storage device:
•
Is not write protected or read-only
•
Has a cluster size too small or more than
the maximum 32 bits
•
Has a valid volume label
•
Has sufficient storage capacity to store the
rescue disk utility and a full system backup
Error Creation progress: Failed to copy image to
rescue disk.
Reason:
•
Unable to revoke access to the disk
•
Unable to revoke access to the drive
•
Disk write failed
•
Unable to dismount the drive
•
Invalid drive
•
Unable to obtain exclusive access to the
drive
•
The disk could not be accessed
•
The drive could not be accessed
•
Unable to revoke exclusive access to the
drive
The mentioned reason prevented copying
the image to the connected storage device.
Ensure the connected storage device:
•
Is not used by other programs
•
Is not write protected or read-only
To solve an error:
1. Check that the correct target disk was selected.
2. Check that the target disk has sufficient storage capacity to store the rescue disk utility and a
full system backup
3. If the storage device is removable, check that it is inserted properly and is of the correct type.
4. Check whether the storage device is write protected. SD Memory Cards often have a small me-
chanical write protection switch on them.
5. Check that the user has the necessary access rights for the target disk.
6. Check that the Rescue Disk Creator is running "As Administrator".
7. Check that no other applications are using the target disk.
3 Software
3-14
IPC Application Controller User's Manual (I632)