Omron AC1-152000, User Manual, Page: 125 / 230

Fan
Forced Air Circulation
OMRON
product
OMRON
product

Room Cooling
Cool the entire room where the control panel is located.
Room Cooling
Cooler
Control panel
Low Temperatures
The IPC may not start normally if the temperature is below 0°C when the power is turned ON. Maintain
an air temperature of at least 5°C inside the panel, by implementing measures such as installing a
low-capacity space heater in the panel.
Alternatively, leave the IPC power ON to keep the IPC warm.
5-3-4
Humidity
Rapid temperature changes can cause condensation to occur, resulting in malfunctioning due to short-
circuiting.
When there is a possibility of this occurring, take measures against condensation, such as leaving the
IPC power ON at night or installing a heater in the control panel to keep it warmer.
Moisture
absorber
Power ON
Control panel
Heater
Examples of Measures against Condensation
OMRON
product
5-3-5
Vibration and Shock
The IPC is tested for conformity with the sine wave vibration test method (IEC 60068-2-6) and the
shock test method (IEC 60068-2-27) of the Environmental Testing for Electrotechnical Products. It is
5 Installation
5-13
IPC Application Controller User's Manual (I632)
5-3 Mount
5
5-3-4
Humidity