Omron AC1-152000, User Manual, Page: 180 / 230

4
Right-click Rescue Disk Creator and then select Run as administrator .
The Rescue Disk Creator Utility window opens.
5
Select the connected USB storage device at Target disk: .
Refer to Messages on page 3-13 for message details if required.
The button Create Rescue Disk will be enabled as soon as a USB storage device is detected
and accepted.
6
Select the Create Rescue Disk button to start the creation process.
Wait until the progress bar shows the Rescue Disk creation finished.
Refer to
Messages on page 3-13 for message details if required.
7
Select Close to close the Rescue Disk Creator.
The Rescue Disk is available but it is still empty , there is no system backup on the Rescue Disk.
Next step is to create a system backup with this Rescue Disk.
Additional Information
• Refer to Create a System Backup with the Rescue Disk on page 7-7 for system backup
details.
• Refer to Restore a System Backup with the Rescue Disk on page 7-28 for system restore
details.
7 Maintenance
7-6
IPC Application Controller User's Manual (I632)