Omron AC1-152000, User Manual, Page: 132 / 230

5-3-9
Wall Mount Procedure
Use the following procedure to mount the IPC in the wall orientation.
Additional Information
• Refer to 5-4-2 Ground on page 5-21 for grounding details.
• Refer to 2-9-1 Mounting Brackets on page 2-18 for the bracket model.
To mount the IPC:
1
Mount the Brackets
A
to the IPC
C
with the 6 Phillips screws
B
supplied with the brackets.
Tighten these screws with a torque of 0.6 N·m.
A
B
C
0
15
The IPC can differ depending on the product configuration.
2
Mount the IPC with the brackets in position.
• Arrange four holes at the location where the IPC with brackets will be mounted.
Refer to 4-1-8 Bracket Specifications on page 4-9 for details.
• Position the IPC with bracket in the mounting location.
• Insert screws through the bracket and into or through the mounting surface.
Note that these screws are not in the scope of delivery.
• Tighten all four screws with a torque matching the screw size and the mounting materials.
The IPC is mounted.
5 Installation
5-20
IPC Application Controller User's Manual (I632)