manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 204 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 204

Recover Windows 10 with the Recovery Drive

Use the following procedure to recover Windows 10 to a previous state using a Recovery Drive.

Ensure a Windows Recovery Drive is created earlier and it is available:

To recover Windows 10:

1

Connect the USB storage device to the IPC.

2

Power ON the IPC and press 

F11

 repeatedly to display the Boot Selection Popup menu.

3

Select your boot device and then select 

Enter

.

The IPC will reboot.

4

When requested choose your keyboard layout.
The window 

Choose an option

 will appear.

5

Select 

Troubleshoot

The window 

Troubleshoot

 will appear.

6

Select 

Recover from a drive

.

Additional Information

Windows will be restored to the state the recovery disk was created!

Follow the instruction and wait whire Windows 10 reinstalls.

Windows 10 is restored.

7 Maintenance

7-30

IPC Application Controller User's Manual (I632)

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments