Omron AC1-152000, User Manual, Page: 75 / 230

Startup
To manually start the Rescue Disk Creator:
1
Locate the Rescue Disk Creator using the Windows Start menu or the Windows search box.
2
Use the option Run as administrator to start the Rescue Disk Creator.
Additional Information
The procedure to use Run as administrator is:
• For Windows 10 using the Start menu:
Rightclick the Rescue Disk Creator , select More and then Run as administrator .
• For Windows 10 using Search :
Rightclick the Rescue Disk Creator in the search results and select Run as administrator .
• For Windows 7 using the Start menu or Search :
Rightclick the Rescue Disk Creator and select Run as administrator .
3
Follow the on-screen instructions to complete the rescue disk.
Use a USB storage device with a capacity of at least the Windows partition size + 16 GB. The
recommended minimum read/write speed is 190 MB/s.
A Rescue Disk is created by the Rescue Disk Creator.
Messages
The Rescue Disk Creator creates a rescue disk in two steps:
1. Format the target disk
2. Copy the rescue disk image to the target disk
Messages can inform the user of an error when applicable.
Refer to
Messages Creating the Rescue Disk on page 3-14 for details.
Use the rescue disk to create a backup or restore your disk.
Messages can inform the user of a backup or restore error when applicable.
Refer to
Messages Using the Rescue Disk on page 3-16 for details.
3 Software
3-13
IPC Application Controller User's Manual (I632)
3-3
Support Software
3
3-3-4
Rescue Disk Creator