Omron AC1-152000, User Manual, Page: 165 / 230

6-2 Power OFF
This section provides Power OFF details.
Before following power OFF procedures below, check that the IPC Application Controller is ON by ex-
amining the LED indicators on the IPC.
6-2-1
Power OFF Using the Power Button
1
Ensure all programs are closed.
If required close all active programs.
2
Press and release the power button on the IPC Application Controller within 1 second.
The IPC Application Controller will shutdown.
Note that this behaviour of can be reconfigured with the Power Options settings.
Refer to
2-3 Power Button on page 2-8 for power button location information.
3
Wait until the PWR LED is OFF.
The IPC is powered OFF.
Additional Information
The IPC will restart automatically if a UPS is connected to the I/O connector of the IPC. Use the
Power button of the UPS or remove the input power from the UPS for a normal shutdown of the
IPC.
6-2-2
Power OFF Using Windows Shut Down
1
Ensure all programs are closed.
If required close all active programs.
2
Select the Windows Shutdown button.
To display the Shutdown button:
• For Windows 10 select the Windows button and then the Power button.
• For Windows 7 select the Windows button.
The IPC Application Controller will shut down.
3
Wait until the PWR LED is OFF.
The IPC Application Controller is powered OFF.
6 Operating Procedures
6-3
IPC Application Controller User's Manual (I632)
6-2 Power OFF
6
6-2-1
Power OFF Using the Power Button