Omron AC1-152000, User Manual, Page: 121 / 230

5-3 Mount
This section describes how to mount the IPC in either a book or wall orientation inside a control panel.
WARNING
Ensure that installation and post-installation checks of the product are
performed by personnel in charge who possess a thorough understand-
ing of the machinery to be installed.
5-3-1
Installation Method in Control Panels
The IPC Application Controller must be mounted in a cabinet or a control panel.
Consider the orientation, cooling distance, noise resistance, ducts and IPC replacement when deter-
mining the space between the IPC and other devices.
Precautions for Safe Use
Install the product in the correct orientation and temperature according to the specifications in
the manual to prevent overheating. Not doing so may result in malfunction.
Precautions for Correct Use
Do not operate or store the product in the following locations. Operation may stop or malfunc-
tions may occur.
• Locations subject to direct sunlight
• Locations subject to temperatures or humidity outside the range specified in the specifica-
tions
• Locations subject to condensation as the result of severe changes in temperature
• Locations subject to corrosive or flammable gases
• Locations subject to dust (especially iron dust) or salts
• Locations subject to exposure to water, oil or chemicals
• Locations subject to shock or vibration
Additional Information
• Ensure you have installed the options before you mount the product.
Refer to 5-2 Install Options on page 5-5 for option details.
• Refer to 5-3-8 Book Mount Procedure on page 5-19
or 5-3-9 Wall Mount Procedure on page 5-20 for orientation details.
• Refer to 5-3-3 Temperature on page 5-10 for temperature details.
• Refer to 5-3-4 Humidity on page 5-13 for humidity details.
• Refer to 5-4 Wire on page 5-21 for wiring details.
5 Installation
5-9
IPC Application Controller User's Manual (I632)
5-3 Mount
5
5-3-1
Installation Method in Control Panels