manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 205 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 205

Recover Windows 10 Using WinRE

WinRE is the Windows 10 Recovery Environment. This environment supports you with the repair of
common causes of unbootable operating systems.

In a Windows Recovery Environment the storage device contains a partition with Windows installation
information. This partition is hidden from Windows.
To use WinRE a login for an account with Administrator priviliges is required.

Use the following procedure to recover Windows 10:

1

Select the Windows 

Start

 Button.

2

In the search field, input 

Change advanced startup options

 and then select it from the search

results. The Settings page for Recovery opens.

7 Maintenance

7-31

IPC Application Controller User's Manual (I632)

7-2
 Corrective Maintenance

7

7-2-6

 Restore and Repair Data

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments