manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 114 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 114

5-1

Unpack

This section provides details on how to unpack the IPC Application Controller.

5-1-1

Unpack Procedure

1

Check the package for damage.
If there is any visible damage:
• Take photos of the package and save them.
• Inform your supplier immediately.

2

Open the package.
Ensure not to damage the contents.

3

Ensure that all items are present.

Additional Information

Refer to 

5-1-2 Items Supplied

 on page 5-2 for the items supplied.

5-1-2

Items Supplied

The IPC Application Controller is supplied with several items.

Additional Information

• Refer to 

Items Supplied with the IPC Application Controller

 on page 5-3 for more details.

• Refer to 

Items Supplied with the Brackets

 on page 5-4 for more details.

5 Installation

5-2

IPC Application Controller User's Manual (I632)

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments