Omron AC1-152000, User Manual, Page: 141 / 230

Power Connector Wiring Materials
Use the power supply connector that was supplied to connect the power supply to the IPC Application
Controller.
• Select power supply conductors with consideration to the voltage drop and heat generation for the
cable length at the installation environment.
• Always use twisted wires to minimize the occurrence of electrical disturbance.
• Recommended power supply conductor sizes are provided in the table.
Wire type Conductor cross-section
Solid conductor
0.5 to 10 mm
2
Flexible conductor
0.5 to 6 mm
2
Flexible conductor, with ferrule and no plastic sleeve
0.5 to 6 mm
2
Flexible conductor, with ferrule and plastic sleeve
0.5 to 4 mm
2
Minimum AWG according to UL/cUL 20
Maximum AWG according to UL/cUL 8
• Power Supply Connector
DC Power Supply
The OMRON S8VK-series power supply is recommended for use with the IPC Application Controller.
Additional Information
• Refer to 2-9-8 Power Supply on page 2-22 for more information.
• Refer to 4-1-3 Power Consumption Specifications on page 4-4 for power consumption details.
5 Installation
5-29
IPC Application Controller User's Manual (I632)
5-4
W
ire
5
5-4-3
Wire the Power Connector