manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 69 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 69

Item

Description

Details

G

Update Screen Button

Use this button to retrieve updated values from the IPC Application Con-
troller.

Product Information Tab

The Production Data tab displays generic IPC Application Controller information. These are e.g. Model
name, Lot number, Serial number, Hardware version, BIOS version, BMC version, and software ver-
sions (Industrial PC Support Utility and Industrial PC System API).

• Model Name is the configuration code of this model.

Refer to 

1-4 Product Configuration

 on page 1-5 for details.

• BMC Version is the firmware version of the Board Management Controller.

Values are not updated automatically. Select the 

Update Screen

 Button to display the latest values.

3 Software

3-7

IPC Application Controller User's Manual (I632)

3-3
 Support Software

3

3-3-3

 Industrial PC Support Utility

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments