manualshive.com logo in svg

Omron AC1-152000, User Manual, Page: 26 / 230

Share
Download
Omron AC1-152000 User Manual Download Page 26

Conformance to KC Certification

When you use this product in South Korea, observe the following precautions.

This product meets the electromagnetic compatibility requirements for business use. There is a risk of
radio interference when this product is used in home.

Conformance to UL and CSA Standards

Some Industrial PC Platform products comply with UL and CSA standards. If you use a product that
complies with UL or CSA standards and must apply those standards to your machinery or devices,
refer to this manual. This manual provides the application conditions for complying with the standards.
If the product is used in a manner not specified in the Instruction Sheet or in the product manuals then
the protection provided by the equipment may be impaired.

Software Licenses and Copyrights

This product incorporates certain third party software. The license and copyright information associat-
ed with this software is available at http://www.fa.omron.co.jp/nj_info_e/.

Regulations and Standards

24

IPC Application Controller User's Manual (I632)

Summary of Contents for AC1-152000







































































































































































































































Reviews:

No comments