manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 39

feature will override this operation.

Free Paper Size Dimensions

Width
Size: 3.4" x 8.5" (86.4 mm x 216 mm)

Length
Size: 5.5" x 14" (140 mm x 355.6 mm)

Feed
Automatic (with optional paper tray)

Manual

Weight 
Minimum: 16 lbs. (60 g / m2)
Maximum: 24 lbs. (90 g / m2)
Recommended: 20 lbs. (75 g / m2)

To enable Free Paper Size, follow this procedure.

- Place the printer OFF-LINE.
- Press LAST / Paper Size for two seconds.
- Press NEXT + repeatedly until FREE is displayed on the operator panel.
- Press ENTER to select FREE as the default setting.
- Press ON-LINE to exit the menu.
- Place the custom size paper stock in Tray 1, the Manual Feed Tray, Tray 2, 
  or the Multi-Purpose Feeder.
- Run the print job.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands