manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 309

Page: 192

Service Manual for OL400e/OL410e/OL410e-PS

Chapter 4 Failure & Repair Analysis

 

RAP 04: Paper Exit Jam

START

Does the paper exit jam occur as soon as the printer is powered ON?

YES

Is the paper on the outlet sensor plate?

YES

Remove the paper.

NO

Refer to Section 4.4.06 of this Service Handbook 

.

Does the outlet sensor plate move freely when touched?

NO

Replace the outlet sensor plate.

YES

Replace the power supply board. 

NO

Is the face-up stacker drawn out or pushed into the printer completely?

NO

Draw the face-up stacker out of the printer completely, then 
push it into the printer completely.

YES

Replace the outlet roller assembly.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands