OKIDATA OL400e Series, Service Manual

Page: 220 / 397

- Press MENU 1 / Menu 2.
The operator panel displays the following message.
DRUM CNT
RESET
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
OP MENU
ENABLE
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
X ADJUST
0 mm *
OL410 / OL410e-PS
- Press LAST - / Paper Size or NEXT + / Demo to move through the settings.
The settings are:
-2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 0
+0.25 +0.50 +0.75 +1.00 +1.25 +1.50 +1.75 +2.00
*An asterisk indicates the current setting.
- Press ENTER / Copies to select the desired setting.
The operator panel displays the following message.
X ADJUST
0 mm *
OL410 / OL410e-PS
*An asterisk indicates the current setting.
- Press ON-LINE to save the setting and exit the user maintenance mode.
The operator panel displays the following message for approximately 15 seconds.
WARM UP
The operator panel displays the following message.
ON-LINE ON-LINE ON-LINE
HPIIP HPIII ADOBE PS
(OL400e) (OL410e) (OL410e/PS)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)