OKIDATA OL400e Series, Service Manual

Page: 225 / 397

Page: 145
Service Manual for OL400e/OL410e/OL410e-PS
Chapter 3 Maintenance & Disassembly
Page Count
General Information
The page count is the total number of pages printed by the unit.
This counter cannot be reset.
The page count is not the same as the drum count or the drum count total.
Procedure
To view the page count, perform the following procedure.
- Close the stacker cover.
- Install the paper cassette tray.
- Clear all error messages displayed on the operator panel.
- Power OFF the unit.
- Press and hold RECOVER / Reset while powering ON the unit.
- Continue to hold RECOVER / RESET through both panel displays.
- The operator panel displays the following message for approximately two seconds.
88888888
88888888
- Continue to hold RECOVER / RESET until the operator panel displays the
following message.
SYS MNT
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
PAGE CNT
XX
XX = the page count
- Press ON-LINE to exit the system maintenance mode.
The operator panel displays the following message.
ON-LINE ON-LINE ON-LINE
HPIIP HPIII ADOBE PS
(OL400e) (OL410e) (OL410e/PS)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)