OKIDATA OL400e Series, Service Manual

Page: 191 / 397

Page: 132
Service Manual for OL400e/OL410e/OL410e-PS
Chapter 3 Maintenance & Disassembly
3.3.01 User's Maintenance Mode
General Information
This maintenance mode allows the user to access the following functions.
- Menu Reset..................................... ( )
- Hex Dump....................................... ( )
- Drum Counter Reset......................... ( )
- Op Menu......................................... ( )
- X-Adjust (OL410e / OL410e-PS)......... ( )
- Y-Adjust (OL410e / OL410e-PS)......... ( )
User's Maintenance Mode Procedure
To enter user maintenance mode, perform the following procedure.
- Close the stacker cover.
- Install the paper cassette tray.
- Clear all error messages displayed on the operator panel.
- Power OFF the unit.
- Press and hold MENU 1 / Menu 2 while powering ON the unit.
Continue to hold through both panel message displays.
The operator panel displays the following for approximately two seconds.
88888888
88888888
- Release MENU 1 / Menu 2 once the operator panel displays
USER MNT
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
MENU
RESET
7) Press MENU 1 / Menu 2.
The operator panel displays the following message.
HEX DUMP
8) Press MENU 1 / Menu 2.
The operator panel displays the following message.
DRUM CNT
RESET
9) Press MENU 1 / Menu 2.
The operator panel displays the following message.
OP MENU
ENABLE