manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 276

The recommended exit sensor lever assembly does not "catch" the leading edge of the 
paper.

This part is installed in place of the Plate: Sensor Outlet. To reach the part, the lower
 base must be removed. Refer to Section 3 for disassembly procedures.

The recommended firmware changes the timing of the paper jam signal to prevent the 
paper jam and allows more paper to be available to the user to grasp and remove. Users 
will be able to clear the jam without calling for service.

The firmware is located on the main controller board.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands