manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 285

Daily Status

88888888
88888888

This message is 
displayed at power 
ON.

When the printer is 
powered ON, the 
LED is lit for about 1 
second to check the 
operation of the 
LED and LCD.

Normal Operation

Daily Status

INITIAL
-IZING
(LED is NOT lit)

This message is 
displayed during 
power ON. The 
controller is being 
initialized. This 
message is 
displayed after the 
LED is lit.

Normal Operation

Daily Status

RESET
(LED is NOT lit)

The data that 
remains in the 
buffer is deleted 
and the printer is 
initialized to default 
settings.The 
temporary DLLs 
and macros are 
deleted.

Normal Operation

Daily Status

RESET
TO SAVE
(LED is NOT lit)

This message is 
displayed when the 
printer cannot be 
reset automatically 
to exit from the 
menu. This is 
because there are 
data, DLLS, and 
macros having 
temporary attributes 
when the printer is 
changed from set 
mode to another 
mode. 

Normal Operation

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands