OKIDATA OL400e Series, Service Manual

Page: 232 / 397

Page: 149
Service Manual for OL400e/OL410e/OL410e-PS
Chapter 3 Maintenance & Disassembly
EEPROM Reset (Printer Initializes)
CAUTION:
- EEPROM Reset returns ALL EEPROM areas to factory defaults.
- ALL customized menu settings will be lost.
- ALWAYS print the menu before doing an EEPROM reset.
General Information
This function resets all EEPROM areas to factory defaults.
This will reset both the menu level 1 and menu level 2 to factory defaults.
ALWAYS print the menu before resetting the EEPROM.
Procedure
To reset the EEPROM, perform the following procedure.
- Close the stacker cover.
- Install the paper cassette tray.
- Clear all error messages displayed on the operator panel.
- Power OFF the unit.
- Press and hold RECOVER / Reset while powering ON the unit.
- Continue to hold RECOVER / RESET through both panel displays.
The operator panel displays the following message for approximately two seconds.
88888888
88888888
- Continue to hold RECOVER / RESET until the operator panel displays the following message.
SYS MNT
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
PAGE CNT
XX
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
PAGE PRT
DISABLE
- Press MENU 1 / Menu 2.
The operator panel displays the following message.
CONT PRT
- Press MENU 1 / Menu 2.