OKIDATA OL400e Series, Service Manual

Page: 257 / 397

Page: 166
Service Manual for OL400e/OL410e/OL410e-PS
Chapter 3 Maintenance & Disassembly
3.5 LUBRICATION General Information
Lubrication should be performed once a year or as needed.
Use Dow Corning Molycoat BR-2 or Molycoat ME-300L or equivalent.
Use very small amounts of lubricant when applying. DO NOT over-lubricate.
DO NOT allow lubricant to contact the surface of any rollers or paper guides.
Lubricate the items listed in the table below.
Lubrication Table
Item Disassembly Procedure
Gear on the shaft of the main stepper motor 3.2.09 ( )
Gear on the shaft of the registration stepper motor 3.2.10 ( )
Teeth of the reduction gear 3.2.12 ( )
Inside of bearings of hopping roller shaft assembly 3.2.13 ( )
Hopping roller shaft, above the fins 3.2.13 ( )
Inside of the pivot points of the reset levers 3.2.14 ( )
Gear on the damper stacker arm 3.2.14 ( )
Stacker cover damper gear 3.2.14 ( )
Transfer roller gear 3.2.16 ( )
Inside of bearings of transfer roller 3.2.16 ( )
Ends of pressure roller shaft 3.2.18 ( )
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business