manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 324

Page: 204

Service Manual for OL400e/OL410e/OL410e-PS

Chapter 4 Failure & Repair Analysis

 

4.8 PRINTER TESTS - Font Sample Test

The Font Test Sample prints samples of the various fonts that can be printed by the printer.

To perform the Font Sample Test, follow this procedure.

- Power ON the printer and wait for it to go ON-LINE.

- Press ON-LINE to place the printer OFF-LINE.

- Press PRINT MENU / Print Fonts for 2 seconds.

- The message PRINT FONTS will be displayed on the LCD Display and, after a few 
  moments, the Font Samples will print.

- When printing is completed, the printer will be OFF-LINE.

- Press ON-LINE to place the printer ON-LINE.

NOTE:

The Font Sample does not include samples of landscape orientation.

All resident scalable fonts can be printed in landscape and portrait orientation.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands