OKIDATA OL400e Series, Service Manual

Page: 200 / 397

REC BUFF AUTO (OL410e), 8KB,
20KB, 50KB, 100KB,
1MB Select amount of
memory devoted to
holding received data;
larger setting improves
computer return to
application time. OL400e
requires optional RAM
for 1 MB setting
FONT PROT OKI600 AUTO, OFF, 100 KB to
3.1MB Reserves a section of
memory for downloading
fonts; improves printing
speed by saving
previously created fonts.
Will take memory away
from total print buffer and
REC BUFF
300DPI AUTO, OFF, 100KB to
3.6MB
AUTO OPERATION AUTOCONT OFF, ON If ON, software or data
error will cause printer to
display error message
then continue to print;
Set Off, printer will stop
printing; press
RECOVER to continue.
AUTOEJCT OFF, 15 SEC, 30 SEC, 1
MIN When set to other than
Off: if printer doesn't
receive data within the
set time (15 Sec, 30 Sec,
or 1 Min), current page
will print and eject.
Meant for use with
software that doesn't
issue Form Feed
command at end of last
page. When Off, printer
won't print last page
without a Form Feed
DARKNESS
CONTROL DARKNESS 0, +1, +2, -2, -1 Control print density.
Negative values lighten,
positive values darken.