manualshive.com logo in svg

OKIDATA OL400e Series, Service Manual

Share
Download
OKIDATA OL400e Series Service Manual Download Page 338

Page: 210

Service Manual for OL400e/OL410e/OL410e-PS

Chapter 4 Failure & Repair Analysis

 

4.8.04  Menu Print

The Menu Print Function provides the information listed below to the service technician.

Program ROM Revision Level

Font ROM Revision Level

Amount of Printer Page Memory

Factory Menu Settings

User Selected Menu settings

To print the Menu, follow this procedure.

- Power ON the printer and wait for it to go ON-LINE.

- Press ON-LINE to place the printer OFF-LINE.

- Press PRINT MENU / Print Font for 1 second.

- The message PRINT MENU will appear on the operator panel.

- The Print Menu Test will print.

- Once printing is complete, the printer will be OFF-LINE.

- Press ON-LINE to place the printer ON-LINE.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for OL400e Series














































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands